IoT & devices

Sensors that tell you about a problem before it becomes a failure

Connect sensors to the assets they measure. Every reading is checked the moment it arrives, and when something crosses a limit the right people know straight away, with the asset and its history in front of them.

All modules
Capabilities

Sensor data that leads to action

Most sensor data sits in a separate portal nobody watches. In Mintema it lives on the asset and drives the response.

All your devices in one list

Strain gauges, flow meters, level sensors, temperature probes and more, with their status and history.

Installed on the asset

Each device is attached to the asset or part it measures, so every reading has an owner.

Works with what you have

Devices and gateways send data over standard internet protocols. No proprietary hardware.

Control devices remotely

Start a pump or switch a fan from the platform with buttons and switches you set up.

Rules on every reading

Every reading is checked against your rules, which can alert people, email teams or notify the control room.

Test before you install

Simulate devices to test your rules and train your teams before real sensors arrive.

See it live

Readings arrive, land on the asset, and rules fire

Three simulated sensors on one structure. Watch a reading arrive and, when a limit is crossed, trigger a rule.

VibrationVIB-2040mm/s
Limit 5.4 mm/s
Bearing tempTMP-1180°C
Limit 70 °C
TiltTM-170°
Limit 0.72 °
Raw payload, as received
Rule activity
  • Waiting for the next breach…
Simulated data generated in your browser. Nothing is sent anywhere.

    

  


  

    


How it works
From sensor to action in four steps
  1. 01
    Add the device
    Register the sensor with its type and unit. It gets its own secure key.
  2. 02
    Attach it
    Install it on the asset or part it measures.
  3. 03
    Connect
    The device or its gateway sends readings over the internet.
  4. 04
    Act
    Your rules check every reading and alert the right people.

    

  


  

    


Deep dive
What makes the sensor data useful
Every reading has an owner
Data that belongs to an asset and a person
Because each device is attached to an asset, every reading belongs to a bearing, a pump or a chiller, and to the team responsible for it.
  • Device history per asset
  • Readings on the asset record
  • Visible to the right team
POST /api/iot/readings{  "device": "VIB-204",  "ts": "02:14:07Z",  "axis": {    "x": 3.1,    "y": 2.8,    "z": 5.9  },  "battery": 87}flattenREADINGS · VIB-204axis.x3.1GOODaxis.y2.8GOODaxis.z5.9ABOVE LIMITbattery87GOODRules evaluate each reading on arrival
Every reading has an ownerIllustrative
No lock-in
Connect the equipment you already have
No special gateway is required. Modern sensors connect directly, and older equipment connects through a standard gateway.
  • Standard protocols
  • Any data format
  • Secure keys per device
DEVICE CONTROLS · MQTTJet fan JF-03Reported: runningLighting level70%Sump pump SP-1StartStopGate barrier G2ClosedEvery command logged with the userBrokerCommand out · state back
No lock-inIllustrative
From signal to action
The reading starts the response
A single rule can alert three control rooms, email the engineers and lower the health score of the asset, all within seconds of the reading.
  • Instant checks
  • Control-room alerts
  • Asset condition updated
Sensor TM-17Tilt · battery · API keyOwnerStructures teamInstalled onAsset A · Bearing B2LifecycleIn serviceKey rotated38 days agoINSTALLATION HISTORY2024 · Asset C2025 · Asset AOffline for 34 minutesDevice status changed · rule matchedOwner notifiedStructures team · in-app and emailBack online · gap closed
From signal to actionIllustrative

    

  


  

    


Business value
What connected assets are worth
Every failure you see coming is cheaper to fix. Sensors pay back when their readings reach the right person in time.
Less unplanned downtime
Problems are caught as trends, before they become failures.
Fewer routine site visits
Remote readings replace many manual rounds and free your crews for real work.
Faster, safer response
Critical readings reach the control room with the asset attached.
Lower connection cost
Standard protocols mean no proprietary hardware and no lock-in.
How it usually works
With Mintema
01Sensor data
In a portal nobody checks.
On the asset, with history.
02Alerts
Emails from a separate screen.
Rules that alert the right people.
03Connection
A project per device brand.
Standard protocols for all.
04Control
Separate control software.
Buttons on the device record.

    

  


  

    


FAQ
IoT, answered
Have a question that is specific to your organisation? A solution engineer will answer it against your own assets, processes and data.
Any device or gateway that can send data over the internet using standard protocols (HTTPS or MQTT). Older equipment connects through a gateway.
Yes. You set up buttons and switches on the device record to send commands, such as starting a pump.
Your rules decide: alert a person or team, send an email, notify the control room or update the asset’s condition.
Yes. The built-in simulator generates realistic readings for testing and training.

    

  


  

    

      
Related modules

      

        Automation Studio
Routine checks and alerts that run on their own, built without code.

        Command center
Alerts to your control rooms by severity, with every response on record.

        Asset register & hierarchy
Every asset you own in one register, down to its smallest part, with condition, cost and history.

      

      

        Communication management
        Automation Studio 
      

    

  


  

    
    

      

        SEE IT WITH YOUR SENSORS
        
Your devices,
connected live.

        
Bring a sample reading from one of your sensors. We will connect it to an asset and set up a rule during the call.

      

      

        
        Talk to sales