Energy & utilities

Water and wastewater asset management software

Mintema is water and wastewater asset management software. Record pumping stations, reservoirs, treatment plants, valves and pipe segments in one register, bring in levels, flows and pump status, and inspect critical assets.

All use cases
The challenge

Water networks fail where nobody was looking.

Pumping stations, valves and pipes are monitored by SCADA and maintained from a separate list. Without a shared register, risk and renewal decisions are made on instinct.

Typical assets in scope
Pumping stationsPumps and motorsValves and hydrantsReservoirs and tanksPipe segmentsTreatment plant equipmentMetersLift stationsManholes
What the operation requires
  • Station and network hierarchy
  • Pipe segments as linear assets
  • Levels, flows and pump status
  • Condition inspections
  • Response procedures
  • Availability and incident reporting
Built in Mintema

How water and wastewater networks is configured, step by step

Every part below is configured in the platform without code: the asset type, its structure, the inspection form and scoring, the work, the sensors and the dashboards. Click a step, or let it play.

Illustrative configuration on sample data. Your fields, forms, scales and workflows are designed with your team.

What you use

The modules behind this use case

One platform and one data model, so the inspection, the work order, the spare part, the sensor and the dashboard all refer to the same asset.

Asset register

Stations, equipment and pipe segments.

IoT & SCADA

Levels, flows and pump status on the assets.

Command center

Incident broadcasts to control rooms.

Work orders

Emergency repairs and preventive work.

GIS

The network and its condition on the map.

Dashboards

Availability, backlog and renewal planning.

Business value

What it is worth to the organisation

The value is measured in fewer failures, less wasted effort, lower risk and better use of budget.

How it usually works
With Mintema
01Network data
SCADA for operations, spreadsheets for assets.
Readings on the assets maintenance manages.
02Bursts
Found by customer calls.
Detected from pressure and broadcast.
03Renewal
By pipe age only.
By condition, failures and risk.
04Reporting
Built by hand for the regulator.
From live dashboards and reports.
FAQ

Water & wastewater networks, answered

Have a question that is specific to your organisation? A solution engineer will answer it against your own assets, processes and data.

Water asset management software records pumping stations, reservoirs, treatment plants, valves and pipes, links SCADA data and inspections to each asset, and supports renewal planning and regulatory reporting.

SCADA values can be sent through a gateway that posts JSON over HTTPS or publishes over MQTT. Readings land on the asset they measure and feed automation rules.

Yes. Mains are split into segments with their own attributes, condition and work history.

Yes. Response procedures per asset can be simulated across the network, and drills are recorded like real broadcasts.

Yes. Condition, failures and risk feed renewal and capital planning dashboards, and capital work runs as projects with a BOQ.

Yes. Levels, flows and pump status post to the asset, and rules raise work orders or alerts when limits are crossed.

Pipe segments carry condition, age and failure history, and the plan ranks renewals by risk and consequence.

The modules that matter most here

IoT & devices

Sensors on the assets they measure, with alerts the moment something goes wrong.

 Command center

Alerts to your control rooms by severity, with every response on record.

 GIS & 3D viewer

Every asset on one map, and every structure in 3D, coloured by its condition.
Data centres Power plants & substations
A WORKING SESSION

Water & wastewater networks,
configured live.

We will configure this use case on sample data during the call: the asset type, an inspection form with its scoring, a work order type and a rule.

Talk to sales