Energy & utilities

Pipeline integrity and tank inspection management software

Mintema is pipeline integrity and tank inspection software. Record pipelines as segments, and tanks, valves and cathodic protection as assets, plan inspections by risk, record wall thickness and corrosion, and turn findings into repairs.

All use cases
The challenge

Integrity is not what you assume, it is what you can prove.

Wall thickness, corrosion and cathodic protection data pile up in many formats, and hazardous work needs control. Without one record, risk-based inspection is guesswork.

Typical assets in scope
Pipeline segmentsBlock valvesPig launchers and receiversStorage tanksTank roofs and floorsCathodic protectionPumps and metersBunds and dikesFire protection
What the operation requires
  • Segments as linear assets
  • Risk = likelihood × consequence
  • Wall thickness and CP measurements
  • Defects with severity and location
  • Permit-controlled repairs
  • Integrity dashboards
Built in Mintema

How pipelines and tank farms is configured, step by step

Every part below is configured in the platform without code: the asset type, its structure, the inspection form and scoring, the work, the sensors and the dashboards. Click a step, or let it play.

Illustrative configuration on sample data. Your fields, forms, scales and workflows are designed with your team.

What you use

The modules behind this use case

One platform and one data model, so the inspection, the work order, the spare part, the sensor and the dashboard all refer to the same asset.

Inspections

Integrity forms with measurements and defects.

Risk dashboards

Risk heat map and inspection compliance.

Work orders

Permit-controlled repairs.

IoT

Pressure, level and CP readings.

Command center

Emergency broadcasts.

Audit trail

A defensible integrity record.

Business value

What it is worth to the organisation

The value is measured in fewer failures, less wasted effort, lower risk and better use of budget.

How it usually works
With Mintema
01Measurements
In contractor reports.
On the segment, with history.
02Planning
Fixed intervals.
Ranked by risk.
03Repairs
Permits on paper.
Permit-gated work orders.
04Evidence
Assembled for the regulator.
On the record, ready to report.
FAQ

Pipelines & tank farms, answered

Have a question that is specific to your organisation? A solution engineer will answer it against your own assets, processes and data.

It records pipelines by segment with their inspections, wall thickness, corrosion and cathodic protection readings, ranks risk, and turns findings into controlled repairs with evidence.

Yes. Inspection forms include measurement blocks with values and units, located on the segment or component.

Risk is calculated as likelihood times consequence, shown on the risk heat map, and used to prioritise inspections and investment.

Yes. Work order types can require a complete permit and materials before any line starts.

Yes. Tanks are their own asset type with shell, roof, floor and nozzles as components.

Yes. Condition, corrosion rate and consequence set the inspection interval per segment or tank.

Repair work orders require permits and approvals, and the repair record links back to the anomaly that raised it.

The modules that matter most here

Inspections & condition

Any inspection, scored your way. Approved results update the asset automatically.

 Work orders

Maintenance that follows your rules, with the right crew, parts and full cost on the asset.

 BI dashboards

Thirty ready dashboards for every role, plus a designer for your own.
Power plants & substations Solar & wind farms
A WORKING SESSION

Pipelines & tank farms,
configured live.

We will configure this use case on sample data during the call: the asset type, an inspection form with its scoring, a work order type and a rule.

Talk to sales