More energy from every panel and every turbine
Renewable plants lose money every hour an inverter or a turbine is down. Mintema watches every asset live, sends the right crew with the right parts and shows exactly where energy is being lost.
Your journey, in six stops
From registering every site to reporting lost energy. Each stop shows the features you get.
- Stop 01RegisterEvery plant down to the string and the blade
- Stop 02Watch liveAlarms and underperformance seen at once
- Stop 03DispatchThe right crew, with the right parts, first time
- Stop 04InspectPanels, blades and towers inspected properly
- Stop 05PlanMaintenance planned around wind and sun
- Stop 06ReportLost energy explained, for owners and lenders
Every plant down to the string and the blade
What you get- Site, block, inverter, string
Solar plants as they are built.
- Turbine, nacelle, blade
Wind turbines down to each component.
- Every site on the map
Blocks, turbines and substations in GIS.
Alarms and underperformance seen at once
What you get- SCADA connected
Output, status and alarms by HTTPS or MQTT.
- Rules on performance
Low output against expected raises a job.
- Remote operations centre
Alarms by severity, with acknowledgement.
The right crew, with the right parts, first time
What you get- Work orders from alarms
With location, history and photos.
- Crews and OEM contractors
Each sees only their own work.
- Spares by site
Inverter cards, fuses and blade kits tracked.
Panels, blades and towers inspected properly
What you get- Your inspection forms
Thermography, blade and tower checks.
- Drone and field photos
Defects recorded on the exact asset.
- Approved results
Condition updated after review.
Maintenance planned around wind and sun
What you get- Planned maintenance
Cleaning, servicing and tests on schedule.
- Hours and production
Service plans that follow real use.
- Permits and safety
Working at height and electrical permits signed.
Lost energy explained, for owners and lenders
What you get- Performance dashboards
Availability and lost energy by cause.
- Cost per MWh
Maintenance cost per site and asset.
- Owner and lender reports
Monthly reports on schedule.
Everything you gain, at a glance
- One register
from string to blade
- Live alarms
from SCADA
- First-time fixes
with the right parts
- Proper inspections
of panels and blades
- Planned work
around the weather
- Lost energy explained
for owners and lenders
Use cases for renewable energy
Each use case shows exactly how the platform is set up for that kind of asset.
Output, inverters, turbines
Power plants & substationsTransformers, switchgear, protection
Telecom towers & sitesPower, fuel, tower safety
Pumps, motors & rotating equipmentCondition-based maintenance
Safety & HSE inspectionsAudits, permits, findings, actions
Fleet & heavy equipmentService by hours, breakdowns, cost
Start with one site, grow across the portfolio
A typical rollout. The scope and timing are agreed with you.
- Month 11
First site
Assets of one plant or farm loaded.
- Asset import
- Asset types
- Crews
- Months 2-32
Alarms and work
SCADA alarms, work orders and spares live.
- Integration
- Rules
- Stores
- Months 3-63
Inspections and plans
Inspections and planned maintenance.
- Forms
- PM plans
- Permits
- Ongoing4
Whole portfolio
All sites with performance and lender reports.
- All sites
- Lost energy
- Reports
Renewable energy, answered
Have a question that is specific to your organisation? A solution engineer will answer it against your own assets, processes and data.
Yes. Output, status and alarms can be sent over HTTPS or MQTT to each asset.
Yes. Solar plants and wind farms are modelled on the same platform.
Yes. Contractors get access limited to their own assets and work orders.
Yes. Downtime and output are reported by site, asset and cause.
Your plants,
producing more.
We will load one of your sites, connect a sample alarm and show it become a dispatched job.